Plumbing Works and Their Arrangements

Before the start of the repair work, a sketch of the sewage system should be drawn. As a rule, it depends on the housing plan. The sketch should provide for the compactness of the rooms, from where the supply and outflow of water is made. Ideal – all plumbing is connected to one manifold, in other words, a pipe leading to the sewage pit. A recommended plumber in Singapore is efficient in this case.

The breakdown of the sewage system, which is most common in apartments

Sewerage repair in an apartment building involves, first of all, the elimination of malfunctions related to the drainage of water or the breakdown of sanitary equipment as a result of physical influence. The main cause of the failure of the sewer is its clogging. The clog can form on any part of the pipeline, therefore its elimination in each specific case will be different.

Clearing clog

  • First, you need to determine the scale of the disaster. If the water slowly, but leaves, the clog is not strong, the elimination of which can be performed relatively easily.
  • To eliminate the cause of the clog, you need to use the plunger. Pre-cork the suction hole and press several times vertically on its handle.
  • As a result of such pressures, hydraulic shocks occur in the sewage system, which can perfectly decompress the plug. When the water chomping is heard and the water rushes into the sink, it means that the blockage has completely disappeared.
  • With a strong clogging, the plunger cannot help. Here you need a plumbing cable, which is a spiral wound metal wire. This rope has a handle and a drill. Its length is about 3 m. It is better to work with a rope alone – one launches the rope deep into the drain hole, and the other screws it in.

Rotational movement of the cable passes all the bends of the pipes, and facilitates the passage of clog. When the cork is broken or the cable is over, it is necessary to perform a couple of reciprocating movements. Then the cable is pulled out and washed. If necessary, the operation is repeated. You can trust on the reliable plumber in Singapore for these works now.

Troubleshooting siphon failure

In order to contain the sewage gases, a siphon is used. Simply put, the siphon prevents the penetration of these gases into the apartment. Siphon, which is out of order, is simply washed with hot water, and then it is worked through with a plunger. However, such cleaning does not always give a positive result. In the event that the clogging is too strong, it is better to take other actions. Place a bucket under it and unscrew the lower plug. Then rinse it with hot water and close the lid tightly.

Eliminating Damper Damage

The repair of sewage in an apartment building often consists in the fact that it is necessary to repair the drain tank. The repair of the tank is made either by its replacement or by simple repair, when some parts are simply out of order. Sometimes it is necessary to replace the spigot connections, which are intended for the drain of polluted water.

Comments are closed.